Description:
MIG/MAG three face welding machine for automotive repairment,
maintenance shops and light lock smith works. Welds steel, high
alloyed steels and aluminium.
· Copper transformer
· Steel wire 0,6-1,2; AL 1,0; FLUX CORRED 1,4
· 10 voltage steps
· For max. 18 kg spools
· 2 roll wire feeder dia 40 mm, driven upper roll
· Wire feeder cover with hinges
· Torch EURO connector
· Gas pre-heating
BASIC Model· Continuous welding, 2S, 4S
· Spot welding, 2S
· Interval welding, 2S
· 2S, 4S
· Burn back trimmer on PCB
MINOR digital (.1) Model· Continuous welding, 2S, 4S
· Spot welding, 2S, 4S
· Interval welding, 2S, 4S
· 2T, 4T
· Pregas, post gas, burn back
· UP-DOWN remote ctrl on torches on request
SYNERGY digital Model· The same like MINOR + electronic feedback of the wire
speed + soft start + SYNERY + measures voltaage and
current
POLAR Models
All models with the possibility to sellect the polarity on torch – on
request – for flux corred wires
Accessories included in price:
· Earthing cable
· Gas hose
· Adapter up to 18 kg
· Roll 0,8-1,0
| Technical Information |
| Mains voltage: | 3x400V ~ ±15% / 50-60Hz |
| Mains protection: | pomalé/delayed 16 A |
| Power factor cosφ: | 0,9 |
| Welding current: | 40 - 260 A |
| Method: | MIG/MAG |
| Welding current (100%): | 160 A |
| Working voltage (100%): | 22,5 V |
| Maximum input power (100%): | 4,3 KVA |
| Maximum input current (100%): | 6,3 A |
| Work cycle: | 30 % |
| Welding current: | 260 A |
| Working voltage: | 26,5 V |
| Maximum input power: | 8,6 kVA |
| Maximum input current: | 12,4 A |
| Open-circuit voltage: | 18,5 - 40,0 V |
| Insulation class: | H |
| Protection rating: | IP 21 |
| Cooling: | AF |
| Construction standards: | EN 60974–1 / EN 50199 |
| Dimensions ( L x D x H ): | 510 x 800 x 810 mm |
| Weight (kg): | 81 |
